Floor Finish Stripper
Hurricane is a high efficiency stripper for heavy buildups. Its low alkalinity makes it the ideal stripper for marble, terrazzo, slate, granite, quarry tile, and brick, as well as conventional tile floors. Hurricane’s low foaming properties make it an excellent choice for use in automatic scrubbers. Hurricane contains no ammonia or caustics.
- Low alkali content makes rinsing easier; leaves no white residue
- Removes ultra high speed and urethane based finishes
- Excellent grout and mortar cleaning ability
- Safe on stone and brick floors
- Works in hot or cold water
Hurricane can be diluted 16 oz. – 24 oz. per gallon, 1 part stripper to 8 parts water, or 1 part stripper to 5.3 parts water.
Hurricane should not be used on asphalt tile or linoleum floors.
Appearance: Clear liquid
Odor: Ethylene glycol butyl ether
Specific Gravity: 0.99 ± 0.02 @ 20°C
Active Ingredients: 43.0% ± 0.5
Total Solids: 15.0% minimum
Flash Point: None
pH: as is: 13.0 ± 0.3
pH: 1:8: 11.3 ± 0.3
Use Dilution: 16 oz. – 24 oz. per gallon, 1 part stripper to 8 parts water, or 1 part stripper to 5.3 parts water
Storage Stability: Minimum one year in sealed container
VOC Content: (as is): 28% by weight
VOC: (use dilution): Less than 5% by weight
Coverage, sq. ft./gal.: approximately 1500
Coverage, sq. meters/liter: 37
Protective Clothing: Rubber gloves, splash goggles or face shield, rubber boots
We manufacture a wide variety of high-quality cleaning chemicals. Check out some of the other products we have to offer our partners.
Check out our other chemical solutions.
Interested? Start the conversation.